Paving Wall Tile

Some Pointers For Paving Wall Tile

Soaking Water

If it is not soaked straight with water or water, the tiles will take in water from the cement, making an area in between the ceramic tile and the cement part, and the adhesion will not be firm, which will cause empty drums, falling tiles, and other issues. The tiles of the kitchen area restroom, the most used is the ceramic tile with water absorption > 10%, and this tile needs to be soaked before paving.

Tile of water-soaked to make: totally taken in clean water, the time is normally more than thirty minutes; the particular time for water-soaked tiles does not make an effort to dominate bubbles. Water-soaked tiles cannot be offered two times, and merchants do decline returns. To prevent waste, employees must compute the quantity of water and the quantity of soaking.

When laying the wall tiles, the building and construction group frequently puts putty on the wall. If the putty is not scratched, it will be tiled straight. The cement is so strong that the putty does not hang from the cement, which can cause the tiles to fall quickly.

Cleaning Up

After the adhesive product has actually strengthened, the joint can be brushed with white cement, plaster, or colored paste, and the mortar can be cleaned up equally and filled with cotton thread.


Pre-pave the tiles before paving. You will find that the result of the bricks is not great, and the percentage is irregular if you wait till you reach a specific level. The removal of the repair work will cause unneeded wear and waste.

The percentage of the incorrect blending of cement sand or an exceedingly high number of cement will cause breaking of the tiles, a big percentage of cement, a strong resistance of the bricks and tiles can get stuck rapidly, but the percentage of cement mix is high, and the cement mortar growth coefficient is big. The proposed ratio is 1: 3 for wall tiles, 1: 2 for flooring tiles, and cement number 32.5 for cement.